Mini Hot Shoe Rechargeable Miniature Camera Macro Xenon Flash

for Mirrorless Digital Camera A7C DLUX5 GRIII GR2 GR3 GR3x ZV1

The smallest flat machine-xenon flash lamp, IGBT is used as a switching element to control the flashing of the xenon lamp and the circuit is controlled by low-voltage isolation. After the high-voltage capacitor energy storage is completed, the green light on the fuselage will light up and serve as a boot prompt. The battery uses 100ma. Currently, every The energy storage time of each flash is about 300 milliseconds to 1.2 seconds, and it can flash about 300 times when it is fully charged. It supports external power supply for power supply. The charging time is about 40 minutes.

Scope of application (to be supplemented)

1. As long as your camera hot shoe has a large central contact, it will work.

2. Confirm that the flash base can be inserted into your camera hot shoe before purchasing. At present, buyers have reported that the Leica Q2m and Leica Q3 do not match the size and cannot be inserted. Below are the exact dimensions of the flash base.

20.41mm*18.64mm*1.94mm
or

0.803 inch* 0.733 inch *0.076 inch

Note:

Due to space constraints for the mini flashes in this series, some protective circuits could not be plugged in and heat dissipation was also limited. Therefore, we ask that you must not use fast charging equipment during use, the recommended charging scheme is: 5V 0.5A/1A, or use a computer to charge. Do not flash continuously, and there should be an interval of more than one second between each flash to ensure heat dissipation, and wait for the green light to turn on before use. If you don't do this, your flash will have a shorter lifespan or even be damaged.

Tip:

The flash is very small, the light may be blocked by the lens after installation on the hot shoe, it is recommended to buy a higher height style. Or choose the right style according to your specific situation.